TELEMAC-MASCARET Forum: Culvert simulation model (1/1)

Welcome, Guest

TOPIC: Culvert simulation model

Culvert simulation model 3 years 9 months ago #39141

Argirò	HI, I have a problem with culvert. I have a simulation in steady flow with input prescribed flow = 1mc/s, i have set a culvert by dimension 1 m diameter. The simulation is ok, but when i see result the level upstream the culvert is too high and the culvert is pressurized but with flow 1 mc/s the level is about 50 cm. Can you help me please?
	The administrator has disabled public write access.

Culvert simulation model 3 years 9 months ago #39143

c.coulet OFFLINE Moderator Posts: 3799 Thank you received: 1056	Impossible to help without more information...
	Christophe The administrator has disabled public write access. The following user(s) said Thank You: Argirò

Culvert simulation model 3 years 9 months ago #39145

Argirò

Hi, thank you for reply my message.
I simulate a lamination basin with two spillway, one in input and one in output. The first spillway is governate about hydrograph and the second about curve h-Q. The culvert is near the second spillway.
I have done a steady simulation with 1 mc/s in input. I attach the result and the files.

Attachments:

The administrator has disabled public write access.

Culvert simulation model 3 years 9 months ago #39148

Argirò	I lost some files. I attach it. Attachments: rating_cur...9-21.txt (1KB) geometry_ok.zip (1,599KB)
	The administrator has disabled public write access.