TELEMAC-MASCARET Forum: Include WindFile with Venuti.f (4/5)

Welcome, Guest

Page:
1
2
3
4
5

TOPIC: Include WindFile with Venuti.f

Include WindFile with Venuti.f 9 years 1 month ago #21716

Léa	Here is finally my result file.
	The administrator has disabled public write access.

Include WindFile with Venuti.f 9 years 1 month ago #21717

cyamin OFFLINE openTELEMAC Guru Posts: 997 Thank you received: 234	Hmmm, Nothing here. Maybe your result file are too big to attach. Upload to WeTranser, Drobpox or similar and post a link. Costas
	The administrator has disabled public write access.

Include WindFile with Venuti.f 9 years 1 month ago #21721

Léa	Here is finally my result file.
	The administrator has disabled public write access.

Include WindFile with Venuti.f 9 years 1 month ago #21722

Léa	I am sorry I am gonna try wetranser! I might have better luck! www.wetransfer.com/downloads/47f5c317907...0160523151039/f8f08f
	The administrator has disabled public write access.

Include WindFile with Venuti.f 9 years 1 month ago #21726

cyamin OFFLINE openTELEMAC Guru Posts: 997 Thank you received: 234	Sorry, but I am not used to French keywords... Obviously, if you uncheck VENT STATIONNAIRE (in FUDAA) or set it to FALSE in your cas file, you should be OK. Regards, Costas
	The administrator has disabled public write access. The following user(s) said Thank You: Léa

Include WindFile with Venuti.f 7 years 7 months ago #28347

newboard17	The link provided earlier does not content any document anymore. Can you please upload the same.. Thanks RunkleS wrote: I upload my project under follow link: daten-transport.de/?id=KnzfuCAtHwUB Perhaps we can fix it togehther... thanks a lot Costas regards, runkle
	The administrator has disabled public write access.

Include WindFile with Venuti.f 7 years 7 months ago #28348

newboard17

The files uploaded by the above link does not content any document anymore. Could you please upload the documents once again..
Thanks

cyamin wrote:

Hello Runkle,

Project runs fine now. Here are some remarks:

Use FUDAA prepro to setup your cas file
Enable CONSIDERATION OF SOURCE TERMS
Choose a Spectrum type for initial and boundary conditions

Here are the cas file and the results:
windUnsteady_CY.7z

Regards,
Costas

The administrator has disabled public write access.

Include WindFile with Venuti.f 7 years 7 months ago #28349

cyamin OFFLINE openTELEMAC Guru Posts: 997 Thank you received: 234	Hello, I don't have this project anymore. I might be able source my modified fortran files that worked with v6p3. If you want to use them with the current version, you need to make adaptations. Regards, Costas
	The administrator has disabled public write access.

Include WindFile with Venuti.f 7 years 7 months ago #28353

newboard17	ok. Thanks for your reply
	The administrator has disabled public write access.

Include WindFile with Venuti.f 7 years 7 months ago #28356

newboard17

Sir, Will you please provide me the fortran files which worked with the version V6p3. So that I can modify as per requirement.

One more thing I would like to ask you that is there any test case available where wind varies with respect to only time (not with respect to space) has been successfully applied to predict extreme wave height during storms.
If it is available will you please share with me the same.

I was carrying out literature survey for prediction of extreme wave height (by Tomawac) and I came across with a paper titled "ESTIMATION OF EXTREME WAVE CONDITIONS FROM HINDCAST SIMULATIONS WITH APPLICATION TO THE WAVE CLIMATE ALONG FRENCH COASTS" where Tomawac was applied to predict extreme wave heights. If you have source for this test case you please share in this forum. I have got access only to the abstract to the said paper. If you are having the full length paper you please share with me.

Thanks

The administrator has disabled public write access.