Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
System Modules
TELEMAC-3D
Modelling a floating breakwater in TELEMAC-3D
Flat Threaded

TOPIC: Modelling a floating breakwater in TELEMAC-3D

Modelling a floating breakwater in TELEMAC-3D 2 years 3 months ago #42176

  • Nfremy
  • Nfremy's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 6
Have you solutions to model a floating structure in telemac-3D ?
Has someone already modelled a ships, for example, in TELEMAC-3D ?
The administrator has disabled public write access.

Modelling a floating breakwater in TELEMAC-3D 2 years 3 months ago #42244

  • jurjendejong
  • jurjendejong's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 28
  • Thank you received: 13
In most hydraulic software this is done by modelling a local pressure field. It seems that approach has been applied in Telemac as well, did you check this post?

www.opentelemac.org/index.php/assistance...a-floating-pier-tips
The administrator has disabled public write access.

Modelling a floating breakwater in TELEMAC-3D 2 years 3 months ago #42245

  • Nfremy
  • Nfremy's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 6
Yes, we had seen this post. And we tried to apply this, but without success. I will try again.
Thank you
The administrator has disabled public write access.
Flat Threaded
Moderators: pham
Forum
System Modules
TELEMAC-3D
Modelling a floating breakwater in TELEMAC-3D

The open TELEMAC-MASCARET template for Joomla!2.5, the HTML 4 version.